THE BIGGEST BUSINESS TEA NET
¡¡
¡¡

Blending machine

Blending machine Product introduction:
CTNYG small mute mixer is an efficient double cone mixer. It is suitable for mixing powder or granule material in chemical industry, food, medicine, feed, ceramics, metallurgy and other industries. The utility model has the advantages of reasonable structure, simple operation, tight operation, convenient feeding and discharging, low noise at work, and the cylinder made of stainless steel, and is easy to clean, and is one of the basic equipment of an enterprise


I. a brief introduction to the twin cone experimental mixer:
The mixer is used for mixing more than two dry powder and granular materials in pharmaceutical, chemical, food and other industries. It is suitable for mixing dry, powdery and granular materials of better flowability.
The mixing barrel of the machine has unique structure, uniform mixing, high efficiency and non accumulation. The whole machine is simple in structure and easy to operate. The outer surface and material contact parts are made of high quality 304 stainless steel. The shape is beautiful, and the maintenance and cleaning are convenient.


II. principle and structure of twin cone experimental mixer:
The bottom of the machine is equipped with a coaxial motor reducer, the power of the motor is transmitted to the driven chain directly through the reduction gear box to drive the mixing barrel. The mixing barrel for 360 DEG operation, the powder or granular material by artificial feeding into the double taper container, mixing barrel with constant rotation, the material in the container on the complex impact movement around, to achieve uniform mixing. The utility model has the advantages of energy saving, convenient operation, low labor intensity and high work efficiency


III.mixing machine use and maintenance:
1. Installation: place the machine on the floor or on the worktable smoothly
2. Use the speed controller to adjust the speed before use, then perform no-load operation, check whether the fasteners are loose, the electrical is normal, whether the machine is running properly, if abnormal, repair and debug.
3. Feed the material to the top, open the feeding cap for feeding, the amount of feed shall not exceed the required volume, and then close the feeding cap, start the machine for operation, if found abnormal in the way, we must stop the inspection.
4, after work or change varieties, must be inside and outside the hopper rinse clean.

¡¡

¡¡

Main technical parameters of CTNYG-15KG mixer blending machine :
Barrel capacity: 43L
The best loading capacity: 15kg
Stirring speed: 33 rpm
Mixing time: 6-8 minutes
Production volume: 15L/times
The power rate: 120W
Voltage: 220V
Machine Size: 600X600X1050mm
Machine Weight: 39kg

Main technical parameters of CTNYG-20KG mixer blending machine:
Barrel capacity: 50L
The maximum loading capacity: 20kg
Stirring speed: 33 rpm
Mixing time: 6-12 minutes
Production volume: 20L/times
The power rate: 250W
Voltage: 220V
Machine Size: 580X650X1100mm
Machine Weight: 42kg

Main technical parameters of CTNYG-25KG mixer blending machine:
Barrel capacity: 72L
The maximum loading capacity: 25kg
Stirring speed: 33 rpm
Mixing time: 6-8 minutes
Production volume: 25L/times
The power rate: 0.25KW
Voltage: 220V
Machine Size: 630X530X1200mm
Machine Weight: 50kg

¡¡

Please tell us what do you need our helping and send your informations to China Teanet Group.
We will reply as soon as we get your any messages.

E-mail:
TEA: sales@teanet.com.cn

MACHINE: sales@mycotrade.com

¡¡